ZZ42 Reenactment Fuse Printed Parts Pack 30 Sets

A pack of 30 sets of printed ZZ42 reenactment fuse parts. You get 30 bases, and 30 spring tubes. I will generally count out each part to 30 and throw in a random number of extras for good measure.Includes:30+ × ZZ42 base30+ × ZZ42 spring tubeThese are the 'hard part' to make for most reenactors without access to a 3D printer the other components are pretty easy to buy or make yourself.Forthe springsand forthe clips.The universal hitch pins are 3/16' x 2'. You can buy them at Tractor Supply, but you might just want to shop around as they are pricey there. I find the ones that come with multiple holes are much more agreeable to use. I turn down the tip in a lathe but I am sure you can come up with something.Notes on the R-clip:You might be able to find or make something better. Even these ones need bent a bit to work for either mine. You need to flatten out the bend in the clip for the stock mines, or bend the loop to 90 degrees and smush it flat for the schu mines. To reproduce the original clip for a reasonable price would mean ordering tens of thousands. It is not practical at this time.